Yes. Kerman is about 16.9 miles from our Madera shop, roughly a 26 minute drive down Highway 145 and across to the Whitesbridge corridor. It is a routine run for us, so scheduling a crew out there is no problem.
We pour concrete driveways, patios, slabs, and repairs for Kerman, CA. Kerman is about 26 minutes from our Madera shop, so a crew reaches it easily. Plain flatwork typically runs $6 to $12 per square foot installed, and we pull the City of Kerman encroachment permit when the approach meets the street.
Concrete services in Kerman
Kerman is a Fresno County farm town of around 17,500 people out on the Whitesbridge corridor. The housing here is younger than in Fresno or Madera: the median home dates to about 1993. That shapes the work we get called for.
Most of what we do in Kerman is not tearing out failed 1970s slabs. It is new driveways and patios on homes that are around 30 years old, plus additions like RV pads and shop slabs on the larger lots at the edge of town. We handle driveways, patios, walkways, garage and shop slabs, steps, and repair or replacement of the flatwork that has started to go.
If you want to see the full menu before you call, our list of concrete services across the Central Valley covers every job type we take on, from a single stoop to a full backyard pour.
What we install in Kerman
A driveway on a Kerman lot is a straightforward two-car approach on most in-town homes, poured 4 inches over compacted Class 2 base with control joints cut on time. We build the driveway to shed water toward the street, not back at the garage.
Out toward the county-line lots and the newer parcels, we pour thicker. A slab that has to carry an RV, a dually, or farm equipment gets 5 to 6 inches with rebar tied on center under the wheel path. Thickness is the cheapest crack insurance there is, so we do not thin it out where the load lives.
Patios and walkways round out most residential jobs. For the front of the house, our driveway installation in Kerman is the most requested service, and it pairs naturally with a new walkway to the door.
Working around Kerman: the homes and lots we pour for
Kerman is growing. The Whispering Falls development, 118 single-family homes plus 54 apartments, was approved on August 13, 2025, with groundbreaking expected in early 2026. That is real, verified growth, and it means a fresh wave of homes that will need driveways, patios, and yard flatwork over the next few years.
On the existing housing stock, the pattern is consistent. A lot of Kerman homes went in during the 1990s build-out, so their original driveways and patios are now old enough to crack, settle, or spall at the edges. That is the sweet spot for a clean tear-out and repour: enough age that patching no longer pays, but a straightforward site to work on.
The bigger parcels at the edges of town are the other half of the work. Long approaches, RV parking, and shop slabs all need more concrete and more base, and we quote that scope in writing before the skid steer shows up.
Permits in Kerman: who you file with
This is where Kerman differs from the unincorporated areas we serve closer to Madera. Kerman is an incorporated city inside Fresno County, so it runs its own permit counter. It is not a Madera County job and not a City of Madera job.
For a driveway or patio that stays entirely on private property, on-site concrete work is generally exempt from a building permit. The line to watch is the public right of way. The moment your driveway approach or apron ties into the city curb and gutter, you need a City of Kerman encroachment permit, and the approach has to be built to the city standard. We handle that filing so you are not standing at a counter on your day off.
We confirm the exact jurisdiction when we walk your site, because the answer changes with your address and where the work stops.
Nearby areas we also serve
Kerman sits between Fresno and Madera, and we work the whole stretch. In the replacement-heavy market to the east, our concrete work across Fresno focuses on the huge pool of 40-year-old flatwork at replacement age. We also pour throughout Madera, Madera Acres, and the Ranchos.
Wherever the job is, the crew, the mix, and the joint discipline are the same. The only thing that changes is which permit counter we file at.
Kerman concrete FAQ
Do you serve Kerman from Madera?
Who issues concrete permits in Kerman?
Kerman is an incorporated city in Fresno County, so it runs its own permit counter, not the Madera County office we use closer to home. On-site flatwork on private property is generally exempt from a building permit, but any driveway approach that ties into the public right of way needs a City of Kerman encroachment permit. We pull it.
How much does concrete cost in Kerman?
A plain gray broom-finish driveway or patio in the Kerman area typically runs $6 to $12 per square foot installed. That is the local Fresno County band, not a national average. Colored, stamped, and exposed aggregate finishes usually run $10 to $22 per square foot once you add pattern, color, and sealer.
Is the ground freezing a problem for concrete in Kerman?
No. Kerman sits on the San Joaquin Valley floor, so the ground does not stay frozen and freeze-thaw is not a design factor here. The real risks are heat during placement and clay soils that shrink and swell with the seasons. We pour early, cure right away, and lay out joints to control cracking.
Can you match concrete to a 1990s Kerman home?
Yes. Most Kerman houses were built around 1993, so we spend a lot of time tying new flatwork into existing driveways, walkways, and garage slabs from that era. We match slope, joint lines, and finish so the new work reads as part of the original, not a patch.
Ready to price your Kerman concrete project?
Call or text and you will talk to someone who pours concrete for a living. We give a written number after we see the site, and we handle the Kerman permit.
We respond the same business day, Monday to Saturday, 9:00 AM to 6:00 PM.
- Locally owned and operated in Madera
- Free on-site estimates
- 4,000 PSI mix on residential flatwork
- We pull the encroachment permit
Get Your Free Estimate