MADERACONCRETE PROS

Concrete done right the first time

Madera Concrete Contractors

Madera Concrete Pros installs driveways, patios, stamped concrete, and slabs across Madera and Fresno counties. Proper base prep, a 4,000 PSI mix, and joints cut on time. That is how concrete lasts in Valley heat and clay soil.

  • Locally owned and operated in Madera
  • Free on-site estimates
  • 4,000 PSI mix on residential flatwork
  • We pull the encroachment permit
Fresh broom finish concrete driveway poured at a Madera, CA home

Concrete Services in Madera, CA

These three jobs make up most of our schedule. Each page covers how we build it, what it costs here, and what to watch out for.

Compacted base, forms and rebar prepared for a concrete pour

Why Concrete Fails in Madera, and How We Prevent It

Concrete in the Central Valley fights two things: heat and soil. Summer pours above 100 degrees flash-dry the surface if the crew does not adjust. And much of Madera sits on clay soils that shrink when they dry and swell when winter rain comes back. Slabs poured on poorly compacted ground crack and settle within a few seasons.

Our fixes are not complicated. We schedule summer pours early in the morning. We compact the base instead of pouring over loose dirt. We use a 4,000 PSI mix on residential flatwork, place rebar where loads demand it, and saw control joints the same day so cracks land where we planned them.

Read how we run a concrete job from first call to final cleanup, or see what concrete really costs in Madera before you collect bids.

About Our Crew

Concrete Contractors Serving Madera County and Beyond

Based at 2230 W Industrial Ave in Madera, we take jobs across Madera and Fresno counties and up into the foothills.

Madera Concrete Questions, Answered

How much does a concrete driveway cost in Madera?

Most plain gray broom finish driveways in Madera run $6 to $12 per square foot installed, depending on size, access, tear-out, and base work. Stamped or colored concrete runs $10 to $22 per square foot. We give you a firm written number after a free on-site look, not a guess over the phone.

Do I need a permit for concrete work in Madera?

It depends on the work and where you live. Inside Madera city limits, work that touches the driveway approach, curb, gutter, or sidewalk needs an encroachment permit from the City of Madera. In unincorporated areas like Madera Ranchos or Madera Acres, Madera County has its own rules. We handle the permit legwork on jobs that need it.

How long before I can use my new concrete?

Stay off it completely for the first 24 to 48 hours. Foot traffic is fine after about 2 days. Keep vehicles off a new driveway for a full 7 days. Concrete keeps gaining strength for weeks after that, so we will walk you through curing and care before we leave.

Will my concrete crack?

All concrete moves, especially on Valley clay soils that shrink and swell between wet winters and bone-dry summers. What matters is controlling where it cracks. We compact the base, use a 4,000 PSI mix, place reinforcement where it earns its keep, and cut control joints on time so movement happens at the joints, not across your slab.

Do you work outside of Madera?

Yes. We are based on W Industrial Ave in Madera and take jobs across Madera and Fresno counties, including Madera Ranchos, Madera Acres, Chowchilla, Fresno, Clovis, Kerman, and Merced, plus the foothill communities of Oakhurst and Coarsegold.

Get a Firm Number, Not a Guess

Tell us what you want done and we will come look at it, measure it, and hand you a written estimate. No pressure, no games with the price later.

559-254-0253

Monday to Saturday, 9:00 AM to 6:00 PM

CSLB License # Pending

Get Your Free Estimate